28mm - 31mm Double Ear O Clips

28mm - 31mm Double Ear 'O' Clips

more products by: 2 EAR CLIPS - MILD STEEL, MIKALOR DOUBLE EARED O CLIPS, 2 EAR MILD STEEL O CLIPS

£0.55

Price Excludes VAT

APPLICATION INSTRUCTIONS

In order to achieve optimum performance
1. Selection of the correct size of ‘O’ Clip is essential
2. Correct method of closure must be employed

IMPORTANT

Selection of Correct Size of clip is essential. The inside Diameter of the Clip should be approximately 0.04mm 1/64in larger than the overall diameter of the tube plus fitting in order to obtain maximum joint efficiency.
To achieve the correct results it is recommended that pincers rather than ordinary pliers are used. Purpose designed ‘O’ Clip Closing Pliers with induction hardened jaws are available from the manufacturers or stockiest.

OTHER SIZES

Product	Diameter Range
Code	mm	inches
OC-007	5 ~ 7	1/4
OC-009	7 ~ 9	5/16
OC-011	9 ~ 11	3/8
OC-012	10 ~ 12	7/16
OC-013	11 – 13	1/2
OC-015	12 – 15	9/16
OC-017	14 - 17	19/32
OC-018	15 – 18	5/8
OC-020	17 - 20	3/4
OC-021	18 - 21	13/16
OC-023	20 – 23	7/8
OC-025	22 - 25	15/16
OC-027	23 – 27	1"
OC-028	23 - 28	1.1/16
OC-031	28 – 31	1.3/16
OC-034	31 – 34	1.1/4
OC-037	34 – 37	1.3/8
OC-040	37 – 40	1.1/2
OC-043	40 – 43	1.5/8
OC-046	43 - 46	1.3/4

SOME ADVANTAGE OF ‘O’ CLIPS vs WORM DRIVE & BOLT TYPE HOSE CLIPS

1. The strength and performance of a ‘O’ Clip is the whole of the steel section, and is not dependent on the single thread strength of a bolt, not or worm drive.

2. ‘O’ Clips are permanent and tamper proof. They have to be destroyed to be removed.

3. Low unit cost from design simplicity.

4. Lower production costs from faster attachment time.

5. Dimension tolerances are lower and more consistent than conventional fasteners.

6. There are no areas of stress concentration. The heat treatment and manufacturing processes ensure uniformity of properties.

Customer Reviews
Write an online review and share your thoughts with other shoppers!