6mm x 1 8 BSPT 80 BAR HP Brass Push Fit Straight Stud Fitting

6mm x 1/8 BSPT 80 BAR HP Brass Push Fit Straight Stud Fitting

more products by: High Pressure Push-in Fittings for Lubrication Systems, Brass High Pressure Push-in Fittings

£2.49

Price Excludes VAT

PICTURE IS FOR ILLUSTRATION ONLY

Technical specification:
Hose types recommended: PA 6-6 and PA 12 DIN 73378
Hose tolerances: +/- 0.05 pursuant to CETOP-standard
Temperature range: -20° C up to + 70°C
Pressure range: max. 80 bars

The pressure range is considerably affected by the hoses and tubes used as well as by ambient temperature.

Other Option we can Offer

AFS P.No	THREAD	D2	SW	L
HP-PMS-04-M6	6 x 1	4mm	10	18,5
HP-PMS-04-M8	8 x 1	4mm	10	23
HP-PMS-04-M10	10 x 1	4mm	10	20
HP-PMS-04-02	1/8 BSPT	4mm	11	20
HP-PMS-04-02NPT	1/8 NPT	4mm	11	20
HP-PMS-04-04/28UNF	1/4 - 28 UNF	4mm	11	20
HP-PMS-06-M6	6 x 1	6mm	12	21,5
HP-PMS-06-M8	8 x 1	6mm	12	25,5
HP-PMS-06-M10	10 x 1	6mm	12	25,5
HP-PMS-06-02	1/8 BSPT	6mm	12	22
HP-PMS-06-02NPT	1/8 NPT	6mm	12	21,5
HP-PMS-06-04/28UNF	1/4 - 28 UNF	6mm	12	23,5

Assembly instructions:

1. Cut plastic tube to length by means of hose clippers 90° and deburr.
2. Take care that the tube is not ovally deformed.
3. Insert tube into push-in fitting up to the stop (the plastic tube offered by us has got graduation marks to facilitate this operation visually)

Dismounting:

By pressing the release collar and concurrent drawing of hose, the plastic tube can be dismounted again. After hose connection, it must be ensured that the hose does not undergo any tensile load and the minimum bending radius is respected.

Please note that our push-in fittings for centralised lubrication systems shall be installed only by skilled staff.

Customer Reviews
Write an online review and share your thoughts with other shoppers!