Email 01245 321320

What are you looking for?

Home  /  Hose Clips & Clamps  /  Mikalor Hose Clips & Clamps W1, W2, W4 & W5  /  Mikalor Double Eared O Clips  /  15mm - 18mm Double Ear 'O' Clips
Mikalor 2 Eared 15mm - 18mm Double Ear 'O' Clips

15mm - 18mm Double Ear 'O' Clips

Stock Status: In Stock
CLICK PICTURE FOR MORE DETAILS & TO PURCHASE On some products we may offer discounts of up to 70% off, if applicable the Discount will be applied at Checkout automatically before you pay. The more you buy the bigger the discount.
Information

APPLICATION INSTRUCTIONS

In order to achieve optimum performance
1. Selection of the correct size of O Clip is essential
2. Correct method of closure must be employed
IMPORTANT
Selection of Correct Size of clip is essential. The inside Diameter of the Clip should be approximately 0.04mm 1/64in larger than the overall diameter of the tube plus fitting in order to obtain maximum joint efficiency.
To achieve the correct results it is recommended that pincers rather than ordinary pliers are used. Purpose designed O Clip Closing Pliers with induction hardened jaws are available from the manufacturers or stockiest.
OTHER SIZES

ProductDiameter Range
Codemminches
OC-0075 ~ 7   1/4 
OC-0097 ~ 9   5/16
OC-0119 ~ 11   3/8 
OC-01210 ~ 12   7/16
OC-01311 13   1/2 
OC-01512 15   9/16
OC-01714 - 17  19/32
OC-01815 18   5/8 
OC-02017 - 20   3/4 
OC-02118 - 21  13/16
OC-02320 23   7/8 
OC-02522 - 25  15/16
OC-02723 271"
OC-02823 - 28 1.1/16
OC-03128 311.3/16
OC-03431 341.1/4
OC-03734 371.3/8
OC-04037 401.1/2
OC-04340 431.5/8
OC-04643 - 461.3/4

SOME ADVANTAGE OF O CLIPS vs WORM DRIVE & BOLT TYPE HOSE CLIPS
1.       The strength and performance of a O Clip is the whole of the steel section, and is not dependent on the single thread strength of a bolt, not or worm drive.
2.       O Clips are permanent and tamper proof. They have to be destroyed to be removed.
3.       Low unit cost from design simplicity.
4.       Lower production costs from faster attachment time.
5.       Dimension tolerances are lower and more consistent than conventional fasteners.
6.       There are no areas of stress concentration. The heat treatment and manufacturing processes ensure uniformity of properties.
Specifications
  • Product Code:
    OC-018
  • Weight:
    0.01kg
Reviews
product review overlay image

Customer reviews

No reviews left yet
Write A Review

No reviews have been left for this product, be the first to leave a review