19mm (3/4") RED 90° Degree SILICONE ELBOW HOSE PIPE

£9.40
Stock Status: In Stock
Bookmark and Share
Information

 

PICTURE IS FOR ILLUSTRATION ONLY 

Product Description:
RED 90 Degree SILICONE HOSE
--
Wall Thickness:
4.2mm (+1/-0.5).
-
(WE MAY SUPPLY 4 OR 5 PLY IN SOME HOSES)
-
Construction:
Flexible silicon tubes with 3 ply polyester reinforcements.
Tube is made with Vinyl Methyl Quality VMQ Silicone with a plain outer and inner appearance.
- 
Temperature:
The temperature scale ranges from -60ºC to 200ºC.
-
Technical characteristics
Recommended for places where a high resistance to compression is needed, because it will not spoil with age and its mechanical characteristics do not change in its operational temperatures.
Highly resistant to ozone
Unaffected by anti-freeze or anti-rust liquids
Highly resistant to hardening with very good compression characteristics

The material of the tubes have a very long life and reduce maintenance problems
Unsuitable for: Oils - Fuels
USE Fluoro Lined Silicone Hoses
 Some Orders may be supplied with alternative non- branded hose - we will email you BEFORE WE DISPATCH!! if this is the case.
OTHER SIZES & COLOURS AVAILABLE in this range BLUE BLACK RED

Part No  90° x 150 Legs SILICONE HOSE  I.D I.D W.P B.P
  3 Ply Polyester Reinforced Silicone Hose inch mm (psi) (psi)
V2090-150-006 Sil Hose 90 Elbow 6mm X 150mm  1/4" 6 214 642
V2090-150-008 Sil Hose 90 Elbow 8mm X 150mm    5/16" 8 172 516
V2090-150-010 Sil Hose 90 Elbow 10mm X 150mm      3/8" 10 146 438
V2090-150-013 Sil Hose 90 Elbow 13mm X 150mm     1/2" 13 120 360
V2090-150-016 Sil Hose 90 Elbow 16mm X 150mm    5/8" 16 103 309
V2090-150-019 Sil Hose 90 Elbow 19mm X 150mm      3/4" 19 90 270
V2090-150-022 Sil Hose 90 Elbow 22mm X 150mm       7/8" 22 80 240
V2090-150-025 Sil Hose 90 Elbow 25mm X 150mm      1" 25 72 216
V2090-150-028 Sil Hose 90 Elbow 28mm X 150mm       1 1/8" 28 67 201
V2090-150-032 Sil Hose 90 Elbow 32mm X 150mm      1 1/4" 32 59 177
V2090-150-035 Sil Hose 90 Elbow 35mm X 150mm    1 3/8" 35 55 165
V2090-150-038 Sil Hose 90 Elbow 38mm X 150mm       1 1/2" 38 52 156
V2090-150-041 Sil Hose 90 Elbow 40mm X 150mm       1 5/8" 40 50 150
V2090-150-045 Sil Hose 90 Elbow 45mm X 150mm       1 3/4" 45 45 135
V2090-150-048 Sil Hose 90 Elbow 48mm X 150mm      1 7/8" 48 43 129
V2090-150-051 Sil Hose 90 Elbow 51mm X 150mm     2" 51 40 120
V2090-150-054 Sil Hose 90 Elbow 54mm X 150mm    2 1/8" 54 39 117
V2090-150-057 Sil Hose 90 Elbow 57mm X 150mm       2 1/4" 57 37 111
V2090-150-060 Sil Hose 90 Elbow 60mm X 150mm     2 3/8" 60 36 108
V2090-150-063 Sil Hose 90 Elbow 63mm X 150mm       2 1/2" 63 34 102
V2090-150-070 Sil Hose 90 Elbow 70mm X 150mm    2 3/4" 70 32 96
V2090-150-076 Sil Hose 90 Elbow 76mm X 150mm       3" 76 29 87
V2090-150-090 Sil Hose 90 Elbow 90mm X 150mm       3 1/2" 90 26 78
V2090-150-100 Sil Hose 90 Elbow 100mm X 150mm       4" 100 23 69

Cutting: Ensure you use a new sharp steel blade for cutting our silicone hoses, to ensure a straight cut tighten a jubilee hose clip around the hose without deforming the hose and use the edge of the clip as a guide for the knife blade.

Fitting: The internal diameter of the hose should be equal to or slightly smaller than the pipe that you are fitting it to. Hoses must never be distorted when fitted, if the hose is stretched into position it is more likely to fail. Hoses when clamped in place should be clamped just behind the formed bead with at least 10mm of hose beyond the clip.

Clamping: It is important that a good quality hose clip is used to ensure that the hose is securely attached to the pipe work. Our range of JCS hose clips will ensure a tight fit without damaging the surface of our silicone hoses.

Cleaning: We recommend good old hot soapy water, oil based solutions such as WD40 and other silicone based products will discolour the hose and should not be used.


Specifications
  • Product Code:
    R-V2090-150-019
  • Weight:
    0.139kg
Reviews
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product