PICTURE IS FOR ILLUSTRATION ONLY
PRICED PER 30 METER COIL
|
Item Title:
|
Silicone Vacuum Hose
|
|
Hose ID:
|
As per item title
|
|
Length:
|
Sold Per 30 Meter Coil
|
|
Temperature Range:
|
- 40°C upto + 200° C (-60 > +230'C Short Periods)
|
|
Reinforcement:
|
No reinforcement
|
| Colour: | BLUE |
|
Working Pressure:
|
No Rating low pressure only
|
|
Bursting Pressure:
|
No Rating
|
|
Suitable for:
|
Vacuum ~ Coolant ~ Water ~ Boost ~ Air ~ Breather ~ Small amounts of oil mist.
|
|
Unsuitable for: |
Oil - Fuel & Power steering fluids |
|
Additional Information:
|
Other Colours also available BLUE, BLACK, RED, ORANGE, GREEN, YELLOW, CLEAR, GUNMETAL
|
OTHER SIZES WE MAY STOCK
| Part No | Silicone Vacuum Hose Coil Lengths upto 30 Metres 75 Shore Peroxide Cured |
| VAC-003 | VacTube 3mm I.D x 7mm O.D |
| VAC-004 | VacTube 4mm I.D x 8mm O.D |
| VAC-005 | VacTube 5mm I.D x 10mm O.D |
| VAC-006 | VacTube 6mm I.D x 11mm O.D |
| VAC-007 | VacTube 7mm I.D x 12mm O.D |
| VAC-008 | VacTube 8mm I.D x 14mm O.D |
| VAC-009 | VacTube 9mm I.D x 15mm O.D |
| VAC-010 | VacTube 10mm I.D x 16mm O.D |
| VAC-013 | *VacTube 13mm I.D x 18mm O.D * |
| VAC-016 | *VacTube 16mm I.D x 21mm O.D * |
| VAC-019 | *VacTube 19mm I.D x 25mm O.D * |
| VAC-022 | *VacTube 22mm I.D x 28mm O.D * |
| VAC-025 | *VacTube 25mm I.D x 31mm O.D * |
PLEASE NOTE: 16mm - 25mm ID HOSES HAVE A RELATIVELY THIN WALL THICKNESS IN PROPORTION TO ITS OVERALL DIAMETER. As a result we recommend this size primarily for aesthetic applications.
Cutting: Ensure you use a new sharp steel blade for cutting our silicone hoses, to ensure a straight cut tighten a jubilee hose clip around the hose without deforming the hose and use the edge of the clip as a guide for the knife blade.
Fitting: The internal diameter of the hose should be equal to or slightly smaller than the pipe that you are fitting it to. Hoses must never be distorted when fitted, if the hose is stretched into position it is more likely to fail. Hoses when clamped in place should be clamped just behind the formed bead with at least 10mm of hose beyond the clip.
Clamping: It is important that a good quality hose clip is used to ensure that the hose is securely attached to the pipe work. Our range of JCS hose clips will ensure a tight fit without damaging the surface of our silicone hoses.
Cleaning: We recommend good old hot soapy water, oil based solutions such as WD40 and other silicone based products will discolour the hose and should not be used.
-
Product Code:VAC-025X30Mtr
-
Weight:11.064kg