PICTURE IS FOR ILLUSTRATION ONLY
PRICED PER 3 METER
(MAX COILS upto 30m)
Silicone Vacuum Hose
As per item title
Sold Per 3 Meter (Cut to Qty Ordered Max 30mtr)
- 40°C upto + 200° C (-60 > +230'C Short Periods)
No Rating low pressure only
Vacuum ~ Coolant ~ Water ~ Boost ~ Air ~ Breather ~ Small amounts of oil mist.
|Oil - Fuel & Power steering fluids|
Other Colours also available Black, BLACK, RED, White, White, White, CLEAR, GUNMETAL
OTHER SIZES WE MAY STOCK
|Part No||Silicone Vacuum Hose |
Coil Lengths upto 30 Metres
75 Shore Peroxide Cured
|WVAC-003||Vac Tube 3mm I.D x 7mm O.D|
|WVAC-004||Vac Tube 4mm I.D x 8mm O.D|
|WVAC-005||Vac Tube 5mm I.D x 10mm O.D|
|WVAC-006||Vac Tube 6mm I.D x 11mm O.D|
|WVAC-007||Vac Tube 7mm I.D x 12mm O.D|
|WVAC-008||Vac Tube 8mm I.D x 14mm O.D|
|WVAC-009||Vac Tube 9mm I.D x 15mm O.D|
|WVAC-010||Vac Tube 10mm I.D x 16mm O.D|
|WVAC-013||*Vac Tube 13mm I.D x 18mm O.D *|
|WVAC-016||*Vac Tube 16mm I.D x 21mm O.D *|
|WVAC-019||*Vac Tube 19mm I.D x 25mm O.D *|
|WVAC-022||*Vac Tube 22mm I.D x 28mm O.D *|
|WVAC-025||*Vac Tube 25mm I.D x 31mm O.D *|
PLEASE NOTE: 16mm - 25mm ID HOSES HAVE A RELATIVELY THIN WALL THICKNESS IN PROPORTION TO ITS OVERALL DIAMETER. As a result we recommend this size primarily for aesthetic applications.
Cutting: Ensure you use a new sharp steel blade for cutting our silicone hoses, to ensure a straight cut tighten a jubilee hose clip around the hose without deforming the hose and use the edge of the clip as a guide for the knife blade.
Fitting: The internal diameter of the hose should be equal to or slightly smaller than the pipe that you are fitting it to. Hoses must never be distorted when fitted, if the hose is stretched into position it is more likely to fail. Hoses when clamped in place should be clamped just behind the formed bead with at least 10mm of hose beyond the clip.
Clamping: It is important that a good quality hose clip is used to ensure that the hose is securely attached to the pipe work. Our range of JCS hose clips will ensure a tight fit without damaging the surface of our silicone hoses.
Cleaning: We recommend good old hot soapy water, oil based solutions such as WD40 and other silicone based products will discolour the hose and should not be used.