4mm x M6x1 HP 90° Elbow FIXED Brass Push Fit Connector

£3.99
Stock Status: In Stock
Bookmark and Share
Information

 PICTURE IS FOR ILLUSTRATION ONLY 

Technical specification:
Hose types recommended: PA 6-6 and PA 12  DIN 73378
Hose tolerances: +/- 0.05 pursuant to CETOP-standard
Temperature range: -20° C up to + 70°C
Pressure range: max. 80 bars


The pressure range is considerably affected by the hoses and tubes used as well as by ambient temperature.

Other Option we can Offer

AFS P.No THREAD D2 SW1 L1 L2 L3
HP-PMLF-04-M6 6 x 1 4mm 10 7.5 17 20
HP-PMLF-04-M8 8 x 1  4mm 10 8 17 20
HP-PMLF-04-M10 10 x 1  4mm 10 8 17 20
HP-PMLF-04-02 1/8 BSPT 4mm 10 8 15 20
HP-PMLF-04-02NPT 1/8 NPT 4mm 10 8 17 20
HP-PML-F04-04/28UNF 1/4 - 28 UNF 4mm 10 8 17 20
HP-PMLF-06-M6 6 x 1  6mm 10 7.5 17 21
HP-PMLF-06-M8 8 x 1  6mm 10 8 17 21
HP-PMLF-06-M10 10 x 1  6mm 10 8 17 21
HP-PMLF-06-02 1/8 BSPT 6mm 10 8 15 21
HP-PMLF-06-02NPT 1/8 NPT 6mm 10 8 17 21
HP-PML-06-04/28UNF 1/4 - 28 UNF 6mm 10 8 17 21


Assembly instructions:

1. Cut plastic tube to length by means of hose clippers 90° and deburr.
2. Take care that the tube is not ovally deformed.
3. Insert tube into push-in fitting up to the stop (the plastic tube offered by us has got graduation marks to facilitate this operation visually)


Dismounting:

 By pressing the release collar and concurrent drawing of hose, the plastic tube can be dismounted again. After hose connection, it must be ensured that the hose does not undergo any tensile load and the minimum bending radius is respected.

Please note that our push-in fittings for centralised lubrication systems shall be installed only by skilled staff.

Specifications
  • Product Code:
    HP-PMLF-04-M6
  • Weight:
    0.02kg
Reviews
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product