01245 321 320
SHOPPING CART
You have:0items in your cart: £0.00
Home > Silicone Hoses & Tubings > Silicone Vacuum Hoses > Blue Silicone Vacuum Hose Tubing > Blue Silicone Vacuum Tube Sold per 5 Metre Coils (5m, 500cm)
PRICE: £6.25
  • Product Description
  • Customer Reviews
  • Related Products

PICTURE IS FOR ILLUSTRATION ONLY 
 PRICED PER 5 METER
 (MAX COILS upto 30m)

Item Title:
Silicone Vacuum Hose 
Hose ID:
As per item title
Length:
Sold Per 5 Meter (Cut to Qty Ordered Max 30mtr)
Temperature Range:
- 40°C upto + 200° C (-60 > +230'C Short Periods)
Reinforcement:
No reinforcement
Colour:BLUE
Working Pressure:
No Rating low pressure only
Bursting Pressure:
No Rating
Suitable for:
Vacuum ~ Coolant ~ Water ~ Boost ~ Air ~ Breather ~ Small amounts of oil mist.

Unsuitable for:

Oil - Fuel & Power steering fluids
 
Additional Information:
Other Colours also available BLUE, BLACK, RED, ORANGE, GREEN, YELLOW, CLEAR, GUNMETAL


OTHER SIZES WE MAY STOCK

Part NoSilicone Vacuum Hose    
Coil Lengths upto 30 Metres
75 Shore Peroxide Cured
VAC-003VacTube 3mm I.D x 7mm O.D 
VAC-004VacTube 4mm I.D x 8mm O.D 
VAC-005VacTube 5mm I.D x 10mm O.D 
VAC-006VacTube 6mm I.D x 11mm O.D
VAC-007VacTube 7mm I.D x 12mm O.D 
VAC-008VacTube 8mm I.D x 14mm O.D 
VAC-009VacTube 9mm I.D x 15mm O.D 
VAC-010VacTube 10mm I.D x 16mm O.D 
VAC-013*VacTube 13mm I.D x 18mm O.D *
VAC-016*VacTube 16mm I.D x 21mm O.D *
VAC-019*VacTube 19mm I.D x 25mm O.D *
VAC-022*VacTube 22mm I.D x 28mm O.D *
VAC-025*VacTube 25mm I.D x 31mm O.D *

PLEASE NOTE: 16mm - 25mm ID HOSES HAVE A RELATIVELY THIN WALL THICKNESS IN PROPORTION TO ITS OVERALL DIAMETER. As a result we recommend this size primarily for aesthetic applications.

Cutting: Ensure you use a new sharp steel blade for cutting our silicone hoses, to ensure a straight cut tighten a jubilee hose clip around the hose without deforming the hose and use the edge of the clip as a guide for the knife blade.

Fitting: The internal diameter of the hose should be equal to or slightly smaller than the pipe that you are fitting it to. Hoses must never be distorted when fitted, if the hose is stretched into position it is more likely to fail. Hoses when clamped in place should be clamped just behind the formed bead with at least 10mm of hose beyond the clip.

Clamping: It is important that a good quality hose clip is used to ensure that the hose is securely attached to the pipe work. Our range of JCS hose clips will ensure a tight fit without damaging the surface of our silicone hoses.

Cleaning: We recommend good old hot soapy water, oil based solutions such as WD40 and other silicone based products will discolour the hose and should not be used.


Customer Reviews
Write an online review and share your thoughts with other shoppers!